Hack WiFi using Android Phones

We’re living in an electronically digitized world, where the combination of WiFi Networks and Android is very common habits. WiFi network is actually a helpful option for wireless connection to the internet with the use of radio-wave of 2.4 GHz and 5 GHz SHF (Super High Frequencies). WiFi sometimes also known as Wireless Local Area Network (WLAN) and most modern WLANs are based on IEEE 802.11 standards, marketed under the Wi-Fi brand name. There is 99.9% chance for any password protected WiFi network to be hacked.

Hack WiFi using Android Phones

Also Read ==> Top 12 wifi hacking app for Android
Also Read ==> Hack WPA2-PSK WiFi Password Using Linux

So, Today We Come Up With The 2 Best Methods To Hack WiFi Using Android Phones:

Method 1# WEP Routers:

  1. Root a compatible device: Not every Android phone or tablet will be able to crack a WPS PIN. The device must have a Broadcom bcm4329 or bcm4330 wireless chipset, and must be rooted. The Cyanogen ROM will offer the best chance of success. Some of the known supported devices include:
  • Nexus 7
  • Galaxy S1/S2/S3/S4/S5
  • Galaxy y
  • Nexus One
  • Desire HD
  • Micromax A67
  1. Download and install bcmon: Download the app by clicking on “bcmon APK“. This tool enables Monitor Mode on your Broadcom chipset, which is essential for being able to crack the PIN. To install an APK file, you’ll need to allow installation from unknown sources in your Security Menu so:
  • Press the Menu button on your phone and tap Settings.
  • Scroll down to Security and tap it to open the Security Menu.
  • Scroll down and check the “Unknown Sources” box.
  • This will let you install apps directly from the APK file.
  1. Run bcmon: After installing the APK file, run the app. If prompted, install the firmware and tools. Tap the “Enable Monitor Mode” option. If the app crashes, open it and try again. If it fails for the third time, your device is most likely not supported.
  • Your device must be rooted in order to run bcmon.
  1. Tap “Run bcmon terminal”: This will launch a terminal like most of the Linux terminals. Type airodump-ng and tap the Enter Airodump will load, and you will be taken to the command prompt again. Type airodump-ng wlan0 and tap the Enter button.
  1. Identify the access point you want to crack: You will see a list of available access points. You must select an access point that is using WEP encryption.
  1. Note the MAC address that appears: This is the MAC address for the router. Make sure that you have the right one if there are multiple routers listed. Note down this MAC address.
  • Also, note down the Channel that the access point is broadcasting on.
  1. Start scanning the channel: You will need to collect information from the access point for several hours before you can attempt to crack the password. Type airodump-ng -c channel# –bssid MAC address -w output ath0 and tap Enter. Airodump will begin scanning. You can leave the device for a while as it scans for information. Be sure to plug it in if you are running low on battery.
  • Replace channel# with the channel number the access point is broadcasting on (e.g. –c 6).
  • Replace MAC address with the MAC address of the router (e.g –bssid 00:0a:95:9d:68:16)
  • Keep scanning until you reach at least 20,000 – 30,000 packets.
  1. Crack the password: Once you have a suitable number of packets, you can start attempting to crack the password. Return to the terminal and type aircrack-ng output*.cap and tap Enter.
  1. Note the hexadecimal password when finished: After the cracking process is complete (which could take several hours), the message Key Found! Will seem, followed by the key in the hexadecimal form. Make sure that “Probability” is 100% or the key will not work.
  • When you enter the key, enter it without the “:“. For example, if the key was 12:34:56:78:90, you would enter 1234567890.

 

Method #2 WPA2 WPS Routers:

  1. Root a compatible device: Not every Android phone or tablet will be able to crack a WPS PIN. The device must have a Broadcom bcm4329 or bcm4330 wireless chipset, and must be rooted. The Cyanogen ROM will offer the best chance of success. Some of the known supported devices include:
  • Nexus 7
  • Galaxy Ace/S1/S2/S3
  • Nexus One
  • Desire HD
  1. Download and install bcmon: Download the app by clicking onbcmon APK“. This tool enables Monitor Mode on your Broadcom chipset, which is essential for being able to crack the PIN. To install an APK file, you’ll need to allow installation from unknown sources in your Security Menu so:
  • Press the Menu button on your phone and tap Settings.
  • Scroll down to Security and tap it to open the Security Menu.
  • Scroll down and check the “Unknown Sources” box.
  • This will let you install apps directly from the APK file.
  1. Run bcmon: After installing the APK file, run the app. If prompted, install the firmware and tools. Tap the “Enable Monitor Mode” option. If the app crashes, open it and try again. If it fails for the third time, your device is most likely not supported.
  • Your device must be rooted in order to run bcmon.
  1. Download and install Reaver: Download the app by clicking on “Reaver App“. Reaver App is a program developed to crack the WPS PIN to retrieve the WPA2 passphrase.
  1. Launch Reaver: Tap the “Reaver for Android” icon in your App drawer. After confirming that you are not using it for illegal purposes, Reaver will scan for available access points. Tap the access point you want to crack to continue.
  • You may need to verify Monitor Mode before proceeding. If this is the case, bcmon will open again.
  • The access point you select must accept WPS authentication. Not all routers support this.
  1. Verify your settings: In most cases you can leave the settings that appear at their default. Make sure that the “Automatic advanced settings” box is checked.
  1. Start the cracking process: Tap the “Start attack” button at the bottom of the Reaver Settings menu. The monitor will open and you will see the results of the ongoing crack displayed.
  • Cracking WPS can take anywhere from 2-10+ hours to complete, and it is not always successful.

Also Read ==> Top 12 wifi hacking app for Android
Also Read ==> Hack WPA2-PSK WiFi Password Using Linux

 

Note: – This guide is only for knowledge purpose and shouldn’t be used for any illegal activities as we are not responsible for anything happens with this.

Hope you like this article. So, don’t forget to share it with your friends and feel free to drop a comment below if you still face any kind of problem.


MAC (Media Access Control) address is a unique identifier assigned to most Network Adapters or Network Interface Cards (NICs) by the manufacturer for identification, IEEE 802 standards use 48 bits or 6 bytes to represent a MAC address. This 48-bit address space contains potentially 248 or 281,474,976,710,656 possible MAC addresses.

IEEE 802 standards define 3 commonly used formats to print a MAC address in hexadecimal digits:

  1. Six groups of two hexadecimal digits separated by hyphens (-), like 01-23-45-67-89-ab
  2. Six groups of two hexadecimal digits separated by colons (:), like 01:23:45:67:89:ab
  3. Three groups of four hexadecimal digits separated by dots (.), like 0123.4567.89ab

Now a day, MAC address is often used to trace the devices playing over the internet. So for private or anonymous browsing MAC address must be hidden.

Here, we are using a tool by which we can easily change our default MAC address at runtime session, which will make our PC be anonymous on the network as no one can trace the actual MAC address.

Steps for changing MAC Address:

  1. Download and install the tool Technitium MAC Address Changer.
  2. Extract and launch the tool in your PC.MAC Changer Hackagon
  3. Now, select the network where you being currently connected.
  4. Now, click on “Random MAC Address” button. (The process will generate any random MAC Address for your computer.)MAC Generate Hackagon
  5. Now, click on the “Change Now” button at the bottom of the window.MAC Generated
  6. Now, you’ll see a pop-up saying MAC Address was changed successfully”.
  7. Done, now your PC is assigned to a new/random anonymous MAC Address on the network.

Note: – This guide is only for knowledge purpose and shouldn’t be used for any illegal activities as we are not responsible for anything happens with this.

So, Stay secure by attackers and surf anonymously on the network by following the above steps to change MAC address of any Windows PC. Hope you like this article. So, don’t forget to share it with your friends and also feel free to drop a comment below if you still face any kind of problem.